P73977ea_F1DS1xxU_QIG.qxd
3/9/04
11:32 AM
3. Connect your USB keyboard and USB mouse
to the CONSOLE ports on your KVM Switch. (Fig. 2)
4. Take the video cable that is attached to your monitor and connect
it to the CONSOLE video port on your KVM Switch. (Fig. 3)
Fig. 3
Page 4
Fig. 2
Step 2: Powering up the KVM Switch
1. Connect the included 9-volt DC, 1A power supply
unit into an available power outlet.
2. Attach the barrel into the power jack on the KVM Switch to power
the unit. The LEDs should illuminate. (Fig. 4)
Fig. 4