Hansgrohe Metris S 310631 Serie Instrucciones De Montaje / Manejo / Garantía página 6

1
2.5 mm
adhesive strips
bandes adhésives
tiras adhesivas
2
red
rouge
rojo
3
6
English
Note:
To prevent shipping damage, the spout is attached
to the spout escutcheon with two adhesive strips.
Remove the strips before installing the spout.
Installation
For proper operation of the faucet, the hot supply
must be on the left, and the cold supply must be
on the right.
Remove the valve mounting nuts from the valves.
Push the valves up into the holes. Install the
mounting nuts on the valves.