4
Remove contamination and coolant residues from the hosepack interface
5
Remove contamination and coolant residues from the torch body interface
6
Fit the protective cap to the torch body interface
7
Fit the torch body:
CAUTION!
Danger due to incompatible system components.
This can result in damage to property.
▶
Only connect torch bodies and hosepacks that are using the same type of cooling.
▶
Only fit water-cooled torch bodies to water-cooled hosepacks.
NOTE!
Risk due to damaged O-ring on the torch body.
A damaged O-ring on the torch body can lead to contamination of the shielding gas, re-
sulting in a defective weld.
▶
Before each start-up, ensure that the O-ring on the torch body is undamaged.
* Grease the O-ring on the torch body
1
2
81