Silverline 321030 Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
GB
Introduction
Thank you for purchasing this Silverline product. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even
if you are familiar with similar products, it is necessary to read this manual carefully to
ensure you fully understand the instruction. Ensure all users of the product read and fully
understand this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Caution!
DO NOT use with compressed gas cylinders!
Conforms to relevant legislation and safety standards
6
Original Instructions
Technical Abbreviations Key
n0
n
psi
Ø
/min or min-1
BSP
dB(A)
Specification
Maximum operating pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.3bar / 90psi
Air consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140L/min / 5cfm
Air inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ¼" BSP,
. . . . . . . . . . . . . . . . . . . . . . . . . . . supplied with two male airline quick connectors
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (EN-6 'UK' and EQ-4 'European' types)
Minimum hose diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5mm (3/8")
No load speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1800min
Cutting capacities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel: 1.2mm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminium: 1.4mm
Width of cut:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5mm
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.27kg
Noise & vibration information:
Level of sound pressure according to Machinery directive 2006/42/EC
Sound pressure L
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80dB(A)
PA
Sound power L
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91dB(A)
WA
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
Vibration total values (triax vector sum) according to Machinery directive 2006/42/EC:
Vibration emission value a
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5m/s
h
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5m/s
As part of our ongoing product development, specifications of Silverline products
may alter without notice.
Noise & Vibration
Sound and vibration levels in the specification are determined according to ISO 28927-3. The
figures given can be used to compare similar tools tested to this standard. These figures may be
used to assess exposure to noise and vibration levels.
The figures represent normal use for the tool in normal working condition. A poorly maintained,
incorrectly assembled or misused tool may produce increased levels of noise and vibration. The
total working period that you can operate this tool must factor in periods where the tool is idle or
switched off. Allow frequent rest breaks when operating this tool.
It is in the interest of users to maximise their safety using the correct safety equipment, like ear
defenders that protect against loud or repetitive noise, and anti-vibration gloves that minimise
vibration. Do not operate the tool with your hands below a normal comfortable temperature, as
vibration will have a greater effect.
No load speed
Rated speed
Pounds per square inch
Diameter
Operations per minute
British Standard Pipe (thread)
Decibel sound level (A weighted)
-1
2
2

Publicidad

Tabla de contenido
loading

Tabla de contenido