Mettler Toledo PUA Serie Manual Del Usuario página 10

1
B
A
3
2
10
Operation
CAUTION
Damage to and/or malfunction of the mobile weighing platform.
▲ Weighing samples or other loads are not permitted on the mobile weighing platform
while moving it.
▲ Put on weighing samples only in weighing mode.
CAUTION
Damage to and/or malfunction of the mobile weighing platform.
2
▲ Ensure that the connection cable does not touch the floor.
▲ Use only the drawbar (1) to pull or push the unit in moving mode. Under no
circumstances pull or push at the stand (2).
3.5.2 Establishing the moving mode
1. Start at roller box 1 (moving roller).
2. Unbolt the lock (A) with one hand and keep it pulled out.
3. Use the other hand to tilt the lever (B) downwards until the lock latches in again.
4. Proceed at roller boxes 2 to 4 as described under steps 2 and 3.
4
1
PUA-series 30290730C