How To Use The Menu Functions - JVC LM-10W Manual De Instrucciones

HOW TO USE THE MENU
FUNCTIONS
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
You can set the following set-up menu items.
• H. POSITION (to adjust horizontal screen position) • CONTROL LOCK (to lock operation buttons)
• V. POSITION (to adjust vertical screen position)
• WHITE BALANCE (to adjust white balance)
1. While pressing the MENU button, press the
PHASE (
MENU
PHASE
2. Press the PHASE (
to select the desired menu item.
CHROMA
PHASE
H. POSITION
V. POSITION
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
3. Press the VOLUME/SELECT buttons to set.
VOLUME/SELECT
– +
8
(cont'd)
• STATUS DISPLAY (to adjust status display)
) button.
The <SET-UP MENU> screen is displayed.
* The screen automatically disappears when no operation is
performed after about 5 minutes.
) or CHROMA (
A selection mark (3) is put next to the selected item.
Front panel Function
button displayed
∞
PHASE ( )
5
CHROMA ( )
Front panel Function
button displayed
+
VOLUME/
3
SELECT (+)
CUTO
–
VOLUME/
2
SELECT (–)
DRV
Notes:
● For the WHITE BALANCE setting, select the CUT OFF or
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
● Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
) button
Contents
Forward selection mark (3)
Reverse selection mark (3)
Contents
Increase (to max. value)
Forward the setting value
Selects CUT OFF setting screen
Decrease (to min. value)
Reverse the setting value
Selects DRIVE setting screen
<SET-UP MENU> screen
< SET–UP MENU >
‰H . POS I T I ON
: 0
V . POS I T I ON : 0
WH I T E BA L A N C E
CONTROL LOCK : OFF
STATUS DISPLAY : ON
EXIT
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
–
<Front panel buttons>
1
Selection mark (3): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (7 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
∞
Forward the menu item.
5
Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3
Forward the setting value.
2
Reverse the setting value.
Exit the <SET-UP MENU>
EXIT
screen. (release)
DRV Selects DRV adjustment.
Selects CUT OFF
CUTO
adjustment.
R Adjusts red signal level.
G Adjusts green signal level.
B Adjusts blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
+