Suntec Wellness Klimatronic FREEZE 7.000+ Manual De Instrucciones página 17

Installation
The unit should stand 50 cm away from other objects because they can strongly influence performance of the
device (Fig. 1).
Warning: Before using this unit, you should let it stand straight for at least 24 hours.
The unit can be easily moved between rooms, but please note the following:
Installation of the exhaust hose, Fig. 2 und 3
1) Place the unit near a power outlet.
2) Attach the adapters at the ends of the exhaust hose.
3) Attach the round end of the exhaust hose into the appropriate hole on the back of the unit.
4) Fix the slide bar at the window. Plug the oval shaped adapter into the opening on the scroll bar.
5) Plug the power cord into the outlet (220-240VAC, 50 Hz).
For common casement window, please use the Air-Block Klima-Sail EAN 4250058312099 (see "Spare parts and
accessory supply").
Possible installation errors
• Make sure that the outlet is not blocked to prevent damage to the unit.
• The exhaust hose should not be bent (Fig. 4).
Control panel
⑨ ⑩
⑧
1 Power
2 Mode
3 Sleep mode
4 Temperature -
5 Temperature +
6 Timer
7 Fan
8 Remote control receiver
9 Water tank indicator
10 Compressor indicator
1. POWER: Press the button to turn the unit on or off. The unit automatically starts in cooling mode with low fan
speed.
2. MODE: Press the Mode button after starting the unit to select between cooling, dehumidifying or fan mode.
⑪ ⑫ ⑬
⑦ ⑥ ⑤
11
12
13
14
15
16
17
18
19
⑭ ⑮ ⑯ ⑰ ⑱ ⑲
④ ③
Indicator for high fan speed
Indicator for low fan speed
Timer indicator
Display
Sleep mode indicator
Cooling mode indicator
Dehumidifying mode indicator
Fan mode indicator
Power indicator
② ①
17