Charging Curve - GYS GYSFLASH HERITAGE 6 A Manual Del Usuario

• Charging curve :

The GYSFLASH Heritage 6A uses an 8 step charging curve which guarantees optimal performance for your battery.
1
U
I
Analysis
< 1s
Step : Analysis
1
Analyses the battery state (charge level, polarity inversion,
wrong battery...)
Step 2 : Recovery (
Recovering damaged elements due to a prolonged deep
discharge.
3
Step : Test
Sulfated battery test
Étape : Desulfation (
4
Battery desulfation algorithm.
• Estimated charge time
Battery capacity
Charging time 20% >>> 80%
• Protections :
The GYSFLASH Heritage 6A has several features to protect it against short-circuits or polarity inversions. It has an
anti-spark feature which prevents sparks whilst connecting the device to the battery. This charger has double insula-
tion and is safe to use with the battery in situ as it will protect the vehicle's on-board electronics.
The GYSFLASH Heritage 6A is fitted with an integrated temperature probe that ensures that the charging current is adapted to the
ambient temprature to prevent internal electronics' overheating.
8
GYSFLASH HERITAGE 6 A
2 3 4
Recovery Test Desulfation
Max 5h < 1s Max 12h
3A-0.5A*)
7.9V / 15.8V)
2 Ah 8 Ah 15 Ah
2 h 6 h 11 h
5
Charge Absorption
Max 20h Max 8h
Step 5 : Charge (
Maximum current fast charge to reach an 80% charge level.
Step 6 : Absorption (
Constant voltage charge to reach a 100% charge level.
Step : Refresh (option 15.8V)
7
If the refresh option has been selected, the charger will inject an
additional current that will generate some gas, thus recondition-
ning the battery's cells. During this phase, the battery may loose a
bit of water.
8
Step : Floating/maintenance charge (
13.6V)
Maintains battery charge level at its maximum.
20 Ah 50 Ah 125 Ah
3 h 6 h 14 h
6 7
Refresh
Floating
(If option activated)
1h - 4h no limit
6A-0.8A*)
7.3V / 14.6V)
6.7V /
*with « small battery » option active
EN
8