Stacking Warning; Guidance And Manufacturer's Declaration- Electromagnetic Emissions- For The Ap 8120 - Avaya WLAN AP 8120 Manual Del Usuario

Regulatory Compliance Statements

Stacking warning

Warning:
The AP 8120 should not be used adjacent to or stacked with other equipment and if adjacent
or stacked use is necessary, the AP 8120 should be observed to verify normal operation in
the configuration in which it will be used.
Guidance and manufacturer's declaration– electromagnetic
emissions— for the AP 8120
The following table describes guidance and the manufacturer's declaration of electromagnetic
emissions for the AP 8120. The customer or the user of the AP 8120 should assure that it is
used in such an environment.
Table 1: Guidance and the manufacturer's declaration for the AP 8120
Guidance and manufacturer's declaration – electromagnetic emissions
The AP 8120 is intended for use in the electromagnetic environment specified in the
following table. The customer or the user of the AP 8120 should assure that it is used in
such an environment.
Emissions test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/ flicker
emissions
IEC 61000-3-3
16 Avaya WLAN 8100 Regulatory Information - WLAN AP 8120 with External Antenna
Compliance
Group 1
Class A
Not applicable
Not applicable
Comments? infodev@avaya.com
Electromagnetic
environment – guidance
The AP8120 uses RF energy
only for its internal function.
Therefore, its RF emissions
are very low and are not likely
to cause any interference in
nearby electronic
equipment.
The AP8120 is suitable for
use in all establishments
other than domestic and
those directly connected to
the public low-voltage power
supply network that supplies
buildings used for domestic
purposes.
March 2012