Regulatory Compliance Statements
RF communications equipment (transmitters) and the AP 8120 as recommended below,
according to the maximum output power of the communications equipment.
Table 4: Recommended separation distances between portable and mobile RF
communications equipment and the AP 8120
Rated maximum
output power of
transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer.
Note:
At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
Note:
These guidelines may not apply in all situations. Electromagnetic propagation is af fected
by absorption and reflection from structures, objects and people.
Radio frequency interference advisory
Warning:
The operation of the AP 8120 series of access points can be interfered with by other
equipment even if that other equipment complies with CISPR emission requirements.
20
Avaya WLAN 8100 Regulatory Information - WLAN AP 8120 with External Antenna
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
80 MHz to 800 MHz
0.117
0.369
1.167
3.689
11.667
Comments? infodev@avaya.com
m
800 MHz to 2,5 GHz
0.117
0.233
0.369
0.738
1.167
2.333
3.689
7.379
11.667
23.333
March 2012