Avaya WLAN AP 8120 Manual Del Usuario página 28

English
4. Tighten the screws to secure the wall mounting bracket tightly against the wall.
5. Align the mounting tabs on the bottom of the access point sheet metal enclosure
6. Allow the access point to slide down the keyhole slots, making sure the access point
7. Secure the access point to the wall mounting bracket and tighten the
8. Verify that the access point is secured to both the bracket and to the wall.
9. Mount the external antennas to the wall within the specified distance from the
28 Avaya WLAN 8100 Regulatory Information - WLAN AP 8120 with External Antenna
with the vertically oriented keyhole slots in the mounting bracket.
mounting tabs are seated at the bottom of the slot.
thumbscrews.
access point.
If you are installing Laird antennas, you can mount the antennas on a mast or
vertical surface (wall) using the articulated mount and mounting bolts.
Laird antennas with arrows showing mast (left) and wall mount (right) options
Comments? infodev@avaya.com
March 2012