Spacer
Locknut
1. Install the Faucet
Insert the faucet into the sink holes.
From under the sink, install the spacers and plastic locknuts.
Handtighten the plastic locknuts. Do not tighten with a wrench.
2. Install the Handspray
For K-7827 Models Only
Apply a bead of plumbers putty or other sealant to the underside
of the spray holder.
Insert the spray holder into the sink hole.
From under the sink, securely handtighten the locknut.
Remove any excess putty or sealant.
Insert the handspray hose through the spray holder.
Connect the handspray hose to the spray tube on the underside
of the faucet.
Kohler Co.
Spray Holder
Apply plumbers putty.
Locknut
Hose
3
111058-2-AE