OPERATION
Attaching the Earpiece to the RSM
1. Remove the rubber seal from the 3.5 mm
audio jack on the side of the RSM.
2. Insert the earpiece's 3.5 mm plug into the
microphone's 3.5 mm audio jack.
Wearing the Earpiece
To minimize interference and optimize
earpiece performance, place the rubber eartip
into the ear until the fit is snug. To provide a
more secure fit (eartip to ear), loop the curved
part of the translucent tube over the ear such
that the coiled part of the tube hangs behind
the ear. Then, attach the swivel clip to shirt
collar or lapel.
Receiving
When the earpiece is connected to the RSM
and the RSM is connected to the radio, audio
is heard only from the earpiece.
2