Changing The Battery; Battery Safety Precautions - GE 26925A Guia Del Usuario

C
HANGING THE
Make sure RING/POWER switch is OFF
before you replace battery.
1. Remove the battery compartment door.
2. Disconnect the cord attached to the
battery pack and remove the battery
pack from the handset.
3. Insert the new battery pack and connect
the cord into the jack inside the handset.
4. Put the battery compartment door back
on.
5. If you don't charge the handset
battery properly (for 12 hours) when
you first set up the phone and/or
when you install a new battery pack,
the battery's long-term performance
will be compromised.
B S
ATTERY AFETY
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• To reduce the risk of fire or personal injury, use only the battery listed in
the User's Guide.
• Keep batteries out of the reach of children.
Ni-Cd
24
B
ATTERY
P
RECAUTIONS
NOTE: The RBRC seal on the battery used in your Thomson
Consumer Electronics product indicates that we are participating in a
program to collect and recycle Nickel Cadmium batteries throughout
the United States of America. Please call 1-800-8-BATTERY for
information or contact your local recycling center.