Changing Thes; Changing The Battery - GE 25880 Guia Del Usuario

Auricular inalámbrico doble y altavoz alámbrico con sistema de mensajes, de 5.8 ghz con identificador de llamada en espera
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To
Review message
Play back messages
Stop message playback
Erase message
Skip message
Turn off/on answering system
Review voice menu options
The base LCD shows REMOTE ACCESS ANSWERING CALL.
TIP: You can bypass the outgoing announcement by pressing any numbered
key on the touch-tone pad while the announcement is playing. Then, you can
enter your security code to access the answering system.
Changing the Security Code
The default security code for accessing the answering system from another
location is 1 2 3.
The security code is set through the programming menu. Refer to
Telephone Set Up for more information.

Changing the Battery

Make sure the telephone is OFF (not inTALK mode) before you replace battery.
1. Remove the battery compartment cover.
2. Disconnect the battery plug from the jack inside the battery compartment
and remove the battery pack from the handset.
3. Insert the new battery pack and reconnect the battery plug to the jack
inside the compartment.
4. Put the battery compartment cover back on.
5. Place handset in charge cradle to charge. If you don't charge the
handset battery properly (for 16 hours) when you first set up the phone
and/or when you install a new battery pack, the battery's long-term
performance will be compromised.
Press this Button
1
2
2
0 (during message playback)
3
4
7
39

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido