Recalling A Scene Preset - ATON DLA2RF Manual De Instrucciones

Recalling a Scene Preset

The Scene Preset values for each room can be recalled in two ways:
1. Press the Scene Button on the RF Remote.
2. Press the Vol + and Vol - simultaneously for one second
on the front of the unit.
ROOM 1
Note: Scene Presets override Default Volume Levels.
Note: Room LEDs are BLUE for any Room with Volume greater than 0 and OFF for any
Room with Volume of 0.
18
DLA2RF 2 Room Speaker Selector
Press
& Hold
©2007 • All rights reserved.
ROOM 2