System Design Overview; Standard Audio/Video Or Stereo Receiver - ATON DLA2RF Manual De Instrucciones

DLA2RF 2 Room Speaker Selector

2. System Design Overview

There are three typical system applications when installing the DLA2RF:
1. Standard A/V or Stereo Receiver
2. Zone 2 Output of an A/V Receiver
3. External Amplifi er

Standard Audio/Video or Stereo Receiver

Most A/V Receivers and Stereo Receivers have two sets of Main Speaker Outputs (typically
labelled "A" and "B". While it is certainly possible to connect the DLA2RF to the "A" outputs, it
is much more useful to connect the "A" outputs to the main speakers (stereo or surround) in
the room in which the receiver is located and connect the "B" outputs to the DLA2RF in order
to expand the audio system to additional areas. Figure 2-1 shows the "B" speaker outputs of
an A/V receiver connected to to the AMPLIFIER INPUT of the DLA2RF. A pair of speakers are
connected to the DLA2RF's Room 1 Speaker Outputs, while an additional pair of speakers is
connected to the Room 2 Speaker Outputs. The RF RECEIVER BASE is connected to the ATON
PORT. This application allows the A/V receiver's speakers to play in the main listening area,
while two additional pairs of speakers play in other areas of the home-each controlled by the RF
remote included with the DLA2RF. This is a single-source application: all areas of the house will
play the same audio source, but with separately controlled volume.
Note: For best audio quality, ATON recommends that Surround Sound and/or DSP modes
(Concert, Hall, Jazz, etc.) be disabled prior to playing audio through the DLA2RF.
PS3
POWER
SUPPLY
PATENT
PENDING
PWR IN
12VDC / 2.1A
CLASS 2 WIRING
Speaker
Cables
R
L
+
-
A
A/V Reciever
Speaker Outputs
Figure 2-1: DLA2RF w/ A/V Receiver Output B Overview
© 2007 • All rights reserved.
RF
Base
AMPLIFIER IR EMITTER
OUTPUTS
INPUT
ATON
PORT
L R
B
1
Speaker
Cables
Room 1 Room 2
Speakers Speakers
7