ATON DLA2RF Manual De Instrucciones página 23

DLA2RF 2 Room Speaker Selector
RF Control
Symptom
No control of DLA2RF
from RF Remote
Intermittent control of
DLA2RF from RF Remote
© 2007 • All rights reserved.
Possible Cause
1. Wiring: Signals from
RF Receiver Base not
reaching DLA2RF
2. Remote Control bat-
teries are dead
1. Position of Receiver
base not optimal
2. Radio Frequency de-
vices operating nearby in
same frequency band
Solution
Check RF Receiver Base
connection to DLA2RF
and verify connectivity.
Check Room 1 indica-
tor on front of DLA2RF
by sending a command
from the RF remote. If
the indicator LED fl ashes
red, the RF signal is be-
ing received.
Replace batteries
Move Receiver base to
fi nd optimum placement
Check for other devices
in the home or neigh-
boring dwellings and
relocate if possible
21