Error Messages - Canon SELPHY CP810 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 121
Cannot print the date
Cannot print from memory cards or USB flash memory
Make sure the date imprint option is set
If you are using DPOF printing, the date imprint settings are configured on the digital camera used for the
DPOF settings.
Cannot print from digital cameras
Make sure the date setting in your digital camera is set to [On]. However, if the setting is [Default], the
date imprint settings on SELPHY will be used.
Cannot make clean prints
Make sure the ink sheet and paper are not dusty.
Make sure there is no dust on the inside surfaces of SELPHY
Make sure no condensation has formed on the inside surfaces of SELPHY
Make sure SELPHY is not placed near a device emitting electromagnetic waves or a strong magnetic
field
(p.
5).
Colors on the computer display and the print are different
Color generation methods are different with computer screens and printers. Moreover, variance may be
attributable to the environment in which the screen is viewed (color and strength of the light), or to the
screen's color adjustment settings.
After using the computer to cancel a print in progress, an image that had already been printed was
printed again when printing resumed
When you restart printing on a Macintosh computer after canceling, an already printed image may print
again when printing resumes.
Paper Problems
Paper will not fit into cassette
Make sure the paper size matches the size of the paper cassette
Paper is not feeding properly/frequent paper jams
Make sure the paper and paper cassette are correctly inserted
Make sure there are less than 19 sheets in the cassette.
Make sure 19 or more sheets have not collected on the outer lid of the paper cassette.
Make sure that you are using dedicated paper
Cannot print the specified number of prints/paper left over
Paper may be left over if the ink runs out first
Paper is jammed
If the paper is sticking out from the front or back (paper ejection slot)
the paper to remove it. However, if a gentle tug is not sufficient to remove the paper, do not attempt to
forcibly pull it out. Turn the printer off and on repeatedly until the paper is ejected. If you have accidentally
turned off the power while printing, turn it on again and wait for the paper to be ejected. Consult your
retailer or a Canon Customer Support Help Desk in the event of a paper jam. Do not remove jammed
paper by force. The printer could be damaged.

Error Messages

If a problem occurs with SELPHY, a message appears on the screen. If a possible solution displays with the
error message, follow the on-screen instructions. If no solution displays, refer to "Troubleshooting"
If these items do not solve your problem, contact a Canon Customer Support Help Desk as listed on the
customer support list.
If a problem occurs while SELPHY is connected to a digital camera, an error message may appear for you to
check on the screen of the digital camera.
36
(p.
33).
(p.
39).
(p.
(pp. 8,
(p.
9).
(p.
14).
(p.
39).
2).
10).
(p. 6)
of SELPHY, gently tug on
(p.
35).

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido