Installing And Starting The Software - Canon SELPHY CP810 Manual Del Usuario

Installing and Starting the Software

Windows 7 and Mac OS X 10.7 are used for these explanations.
Items to Prepare
Computer
Supplied CD-ROM (SELPHY CP810 Solution Disk)
A commercially available USB cable shorter than 2.5 m (8.2 ft.) (SELPHY terminal requires a Mini-B
connector)
1
2
28
(p. 2)
Install the software.
Windows
Place the CD-ROM in the computer's CD-ROM drive
and click [Easy Installation] when the screen on the left
appears.
Follow the on-screen instructions to proceed.
If the User Account Control window appears, follow the
on-screen instructions to proceed.
Proceed with the installation to display the screen on the
left.
Macintosh
Insert the CD-ROM in the computer's CD-ROM drive.
Click [Finder] in the Dock (the bar at the bottom of the
desktop) and double click [
If is displayed on the desktop, you can also double-
click to display files in the CD-ROM.
When the screen on the left appears, click [Install] and
follow the on-screen instructions to proceed.
When the installation finishes, click [Finish] to restart the
computer and complete the installation.
Prepare SELPHY.
Turn off SELPHY and remove the memory card or USB
flash memory.
Insert an ink cassette and a paper cassette that contains
paper you want to use into SELPHY
] in the CD-ROM.
(pp. 7 – 10).