Printing Id Photos - Canon SELPHY CP810 Manual Del Usuario

Printing ID Photos

1
2
3
The ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please
contact the appropriate institution for regulation details.
You cannot use card size paper.
[Borders] settings will be ignored.
Settings are cleared when printing is finished.
The date and file number will not be printed.
If you have selected 2 types of images, these 2 types are printed in equal numbers for the number of columns in
the layout.
If you have selected 2 types of images and the number of columns is an odd number, nothing will be printed in
the center column.
You can print your image as an ID photo. You can
select the size from [Multi-size], [Standard]*, and
[Custom].
Also, you can select 2 types of images to be printed
on one sheet.
* The Standard size conforms to the ICAO international
standards.
Set to print ID photos.
Press the k button.
Press the ud buttons to select [ID Photo], and then
press the o button.
Specify the ID photo size.
Press the lr buttons to select the size, and then press
the o button.
If you have selected [Custom], press the ud buttons to
select [Long Side], press the lr buttons to specify the
length, then specify the length for [Short Side], and then
press o again. The values which can be specified in
[Short Side] change automatically according to the value
you have specified in [Long Side].
If you have selected [Multi-size], the size of the image to
be printed is displayed.
Select and print the images.
Select the image by pressing the lr buttons, and press
the u button.
is displayed at the bottom right of the
screen (up to 2 images).
Press the button to set the cropping range
EDIT
Print as described in Step 6 on
(p. 18).
p. 14.
19