Preparing the Paper Cassette
1
2
3
Glossy side
4
Printing with L Size
8
Check the paper size.
Check that the prepared ink cassette and the size shown
on the paper cassette (POSTCARD (4x6in), CARD SIZE,
etc.) match.
Open the lid.
There are two layers of lids. Open the outer lid
then open the inner lid
Set the paper.
Set the paper into the paper cassette that you prepared.
You can place up to 18 sheets in the paper cassette.
Inserting 19 or more sheets may damage the printer or
cause malfunction.
Hold the paper as shown in the illustration and load with
the glossy side up. (Do not touch the print side (glossy
side) of the paper with your fingers. This may prevent
you from making clean prints.)
If a protective sheet is included with the paper, remove it
and set only the paper into the cassette.
When making Postcard size prints that have an area for
pasting a stamp, insert the cards so that the stamp area
is faced as shown in the illustration.
Close the lid.
Close the inner lid until it clicks into place. Leave the
outer lid open during printing.
You can print in L size using PCPL-CP400 (sold
separately). You can also print in Postcard size by
removing the adapter as shown in the illustration.
first,
.