Getting started
Connections
*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
To connect to a TV
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs
to your separate audio equipment. (See the following pages.)
The unit
DIGITAL OUT
VIDEO OUT
PCM / STREAM
COMPONENT
Y
P
P
B
R
COAXIAL
RIGHT
LEFT
S-VIDEO
VIDEO
AUDIO OUT
Yellow
White
Red
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable
(optional) in addition to the (standard) video connection to get better picture quality.
Enabling the S-VIDEO output or the VIDEO output
For your TV connection, you can use either the S-video output or the component video output.
When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the
rear panel to "S-VIDEO AND VIDEO". Then, "S-VIDEO" appears on the display window for a few seconds.
(Display Window)
VCDVD
PROGRAM
Note that you must change the switch position while the unit is stopped or while the unit power is off with the DVD
removed. Otherwise, the changed setting is not effective.
VIDEO OUT SELECT
S-VIDEO
COMPONENT
AND
VIDEO
NTSC
PAL
Audio/Video cable
(supplied)
S-video cable
(not supplied)
GROUP
TITLE TRACK CHAP
RANDOM
AV COMPU LINK
TV
Yellow
White
Red
A - B
1
IN
S-VIDEO
VIDEO
LEFT
AUDIO
RIGHT
English
13