Safety Instructions - wolfcraft 3750000 Manual De Instrucciones

• Adhere to the safety regulations of the manufacture of
your drive machines under all circumstances
(e.g. electric drill, right-angle grinder etc.)
• These appliances have to be in accordance with the
VDE-regulations
Appliances built after 1995 have to have a CE-sign.
• Disconnect the power:
- before changing of attachments
- before changing of work pieces
- before maintenance jobs
- while not in use
• Before commencing work test the operatability of the
appliances and tools. Never work with damaged or
blunt tools.
• Check that the mounting of the appliances used is
correct (e. g. bolted joints) before commencing work.
• Ensure the work piece is tight and secure.
• The space between the worktable and the backing
pad should be no more than 3 mm.
• Take care that there is always a stable support for the
workpiece or clamp the component to be machined
tightly.
• Take care that you and the appliances used are
always standing securely.
• Adhere to the data quoted regarding minimum/
speeds and direction of rotation on the product,
packaging or in the operating instructions for the
appliances and tools to be used.
• Use tools only for their actual intended purpose.
• Never remove existing protective devices.
• Use goggles or breathing protection for mouth/nose
during all jobs, that cause dust, chips, fumes or sparks.
• Protect your hearing when doing work causing a lot of
noise.
• Wear safety glasses, strong protective gloves and a
mouth and nose protector for all work in which dust,
shavings, fumes or sparks occur.
• Never work towards your body.
• Never reach into equipment which is in operation.
• Take care that all electrical equipment is protected
against wet, dust and dampness.
• Keep children away from your workshop and store
your equipment and tools in a safe place.
• Never allow inexperienced personnel to work with
your equipment and tools without instructions or
supervision.
• Always work well planned and concentrated.
• Keep your work area orderly.
• Use only original wolfcraft
G

Safety instructions

spare parts.
®
19