Widex DRY-GO UV Instrucciones De Uso página 9

Operating instructions
1. Insert the USB cable into the 5V power
supply and the round plug into the
socket on the rear side of your drying
station. Illustration 1.
2. Plug the power supply into an AC power
socket. See illustration 1.
3. Open the lid of your Widex DRY-GO UV.
4. Remove the batteries from the hearing
aids. Clean your earmolds and place
them along with your hearing aids in the
drying station with the battery drawer
open. See illustration 2.
5. To begin the dying process, touch the
sensor button and close the lid. See
Illustration 2.
• The LED light will indicate that the
unit is functioning and will blink
during the first four minutes that the
UV-C light is on.
• Towards the end of the drying cycle,
the UV-C light will automatically turn
on for another four minutes
9