Chapter 2. Normal Operation; 2.1. Operating Instructions For Plant Personnel; Start Here For Safety; Check Switch Settings - Milnor 72044SP2 Manual De Instrucciones

Chapter 2. Normal Operation

2
Chapter
Normal Operation
BICWCO03 (Published) Book specs- Dates: 20070515 / 20070515 / 20070515 Lang: ENG01 Applic: CWS

2.1. Operating Instructions for Plant Personnel

Start Here for Safety

2.1.1.
This document is meant to remind you, the person operating this washer extractor, of what is
required to operate this machine. Do not attempt to operate this machine before an experienced,
trained operator explains the details to you.
DANGER 2 : Multiple Hazards—Careless operator actions can kill or injure personnel,
damage or destroy the machine, damage property, and/or void the warranty.
DANGER 3 : Electrocution and Electrical Burn Hazards—Contact with electric power
can kill or seriously injure you. Electric power is present inside the cabinetry unless the main
machine power disconnect is off.
• Do not unlock or open electric box doors.
• Know the location of the main machine disconnect and use it in an emergency to remove
all electric power from the machine.
• Do not service the machine unless qualified and authorized. You must clearly understand
the hazards and how to avoid them.
CAUTION 4 : Collision, Crushing and Pinch Hazards—Contact with moving
components normally isolated by guards, covers, and panels, can entangle and crush your limbs.
These components move automatically.

Check Switch Settings

2.1.2.
Display or Action
PELLERIN MILNOR CORPORATION
Explanation
Check that the run/program keyswitch is at
R
All emergency stop buttons must be unlatched and in the ready
position to allow machine operation.
Check that the master switch is at
m/M
12
.
R
.
M