Equipping And Connecting The Welding Torch; Note On Inner Liner With Gas-Cooled Welding Torches - Fronius MTG 2500 S Manual De Instrucciones

Equipping and connecting the welding torch

Note on inner li-
NOTE!
ner with gas-coo-
Risk due to incorrect wire-guide insert.
led welding tor-
ches This can result in poor-quality weld properties.
▶
▶
1
If a plastic inner liner with a bronze wire-guide insert is used with gas-cooled welding
torches instead of a steel inner liner, the power data stated in the technical data
must be reduced by 30%.
In order to operate gas-cooled welding torches at maximum power, replace the
40 mm (1.575 in.) wire-guide insert with a 300 mm (11.81 in.) wire-guide insert.
29