Maintenance At Every Start-Up; Maintenance At Every Wirespool/Basket-Type Spool Replacement - Fronius MTG 2500 S Manual De Instrucciones

Wearing parts MTG 2500 S:
1.
2.
3.
4.
Maintenance at
1
every start-up
2
Maintenance at MTG 2100 S:
every wirespool/
1
basket-type spool
replacement
Remove wearing parts and clean wirefeeding hose with reduced compressed air
Insulating parts
- Burnt outer edges, notches
Nozzle fittings
- Burnt outer edges, notches
- Heavily coated with welding spatter
Contact tips
- Ground (oval) wire entry and wire exit bores
- Heavily coated with welding spatter
- Penetration at the tip of the contact tip
Gas nozzles
- Heavily coated with welding spatter
- Burnt outer edges
- Notches
Check wearing parts for damage and replace damaged wearing parts
- For detailed information on defective wearing parts, refer to the section
ing defective wearing parts
Remove welding spatter from the wearing parts
from page 36 onwards
Identify-
37