180°
ROTATION
The photo camera is equipped with a built-in G-sensor able to detect the orientation of the camera.
Giving TUBE a 180° rotation the video obtained will have the same rotation. In this manner the photo camera
can be mounted in many ways, and the image will be always perfect.
Notes
• The 180° rotation function is available for video mode, not photo mode.
• Adjust the camera orientation before starting the video recording as this function cannot be
activated during the recording.
• The function can be deactivated through the software included.
PC
CONNECTION
The device can be connected to a PC as a mass storage device and for photo/video transfer from/ to a PC.
• Connect your camera to the PC through the USB cable included.
• Press the
key to turn the camera on.
With the camera connected to a PC as a mass storage device, you can:
• Open the MicroSD folder and check the files saved in the photo camera.
• Format the MicroSD card.
• Delete photos and videos.
TUBE
APPLICATION
TUBE is equipped with a software built in the cam itself; it is possible to have access to the application in this
way:
•
Plug the formatted MicroSD card in the TUBE.
•
Turn TUBE on.
•
Connect TUBE to PC through the USB cable.
•
Wait a couple of seconds and check if in the computer management you can find the TUBE unit.
The application for TUBE management is inside the unit.
Now:
•
Disconnect the photo camera from the PC.
•
Turn the camera on.
•
Connect the camera to the PC.
•
Enter the identified disk unit.
•
Start the application.