geberit AQUACLEAN TUMA COMFORT Manual De Instrucciones página 26

EN
Testing the anal shower
Prerequisite
– Comfort model: User is simulated.
A shower cycle ends after 50 seconds. If
required, restart the shower cycle.
1
Briefly press the <Shower> button on the
lateral control panel.
✓ The device performs prerinsing.
✓ The spray arm extends.
✓ The anal shower starts in oscillating
function. A small amount of water drains
into the WC ceramic appliance via the
overflow. The anal shower is active for
50 s econds.
26
2
Test adjustability of spray intensity.
3
Test shower water temperature.
Result
✓ The shower water is noticeably warm.
✓ The device performs a shower cycle. Pressing
the <Shower> button again interrupts the
shower cycle.
✓ After completing the shower cycle, the spray
arm retracts.
✓ The device performs postrinsing.
✓ The dryer functionality starts after the shower
procedure (Comfort model).
If the shower water remains cold, the
device is defective. Inform customer
service.
36028798927961355-1 © 07-2020
967.305.00.0(03)