geberit AQUACLEAN TUMA COMFORT Manual De Instrucciones página 28

EN
If several devices of the same type are
installed in immediate proximity (e.g. in
hotels), remote control must be assigned to
a device.
If the device does not beep and the LED on
the lateral control panel does not light up
blue for several seconds, then the remote
control must be re-assigned.
Re-assigning the remote control
This section only applies to the Comfort
model.
If the device cannot be controlled using the remote
control, then the remote control must be re-
assigned.
▶
Press the <+> button on the remote control
and the <+> button on the lateral control
panel at the same time for approx. 10
seconds.
Result
✓ The device beeps (1x).
✓ The LED on the lateral control panel lights up
blue for several seconds.
28
Testing the remote control
This section only applies to the Comfort
model.
Prerequisite
– The remote control has been set up.
– User is simulated.
1
Press the <Shower> button briefly in order
to start the anal shower with oscillating
function.
✓ The device performs a shower cycle.
A shower cycle ends after 50 seconds. If
required, restart the shower cycle.
36028798927961355-1 © 07-2020
967.305.00.0(03)