Broan PM300SS Instrucciones De Instalación, Uso Y Cuidado página 8

PREPARE THE CABINET (
6 . Install the cabinet brackets as follow (FIG . 8):
 Align the bracket flush with the bottom of the right
cabinet side panel, with the hooks marked position (E)
between the bottom embossed holes . For the narrow
edge configuration, trace a line on the top of the
bracket . For wide edge configuration, trace a line at the
bottom of the central slots .
 Lift the bracket flush with the marked lined . Assemble
the bracket to the cabinet side panel using 2 no . 8 x 5/8"
wood screws (included in parts bag) through the upper
holes .
NOTE: Do not use the embossed holes to atttach the
bracket to the cabinet .
 Repeat steps  to  for the left cabinet side panel .
8
' )
cont d
Narrow edge
configuration
FLUSH
Wide edge
configuration
FLUSH
HO0414
E
E
FIG. 8