Do the same
for the other side.
Caution
Removal, installation, and adjustment for repair or maintenance of the projector should be performed only by specialists with
the required technical know-how and ability. For information about repair or maintenance of the projector, refer to "User's
Guide" supplied with the projector.
Inquiries
Inquiries can be directed to the contact information given in "User's Guide" supplied with the projector.
Specifications
Dimensions
Weight
Adjustable range
20
Secure this.
Vertical tilt adjustment
Horizontal roll adjustment
Horizontal rotation adjustment
Vertical tilt adjustment
C
Insert the other piece for the screen side and fit it to the
ceiling plate cover for the rear side.
D
Insert the M4x10 screws into the screw holes on the ceiling
plate cover and tighten them with the ball point hex wrench.
342 (W) x 55 (H) x 230 (D) mm (including ceiling plate cover)
Approx. 3.5 kg (including ceiling plate cover)
°
0 to -8
°
-2.5 to 2.5
°
-3 to 3
Horizontal roll adjustment
Horizontal rotation adjustment