Safety - Sonel KT-128 Manual De Uso

Before you proceed to operate the camera, acquaint yourself thoroughly with the present manual and ob-
serve the safety regulations and specifications defined by the producer.

Any application that differs from those specified in this manual may result in damage to the device and
constitute a source of danger for the user.

The camera must not be used in rooms where special conditions are present e.g. fire and explosion risk.

It is forbidden to use damaged or malfunctioning camera.

Do not use any other adapter than the one supplied with the camera.

Repairs may be performed only by an authorised service point.
KT-128 thermal camera is designed to measure and record the images in the infrared. It is designed to pro-
vide the user with maximum performance and safety during the work. However, the following guidelines and
recommendations must be observed at all times (in addition to all binding precautions applicable at individual
work stands and work areas):

Keep the camera steady when performing the measurements.

Do not use the camera in temperatures exceeding its working and storage temperature ranges.

Do not direct the camera toward very high intensity radiation sources such as the sun, lasers or
welding arcs etc.

Do not expose the camera to dust and moisture. When operating the device near water, ensure that it is
adequately guarded against splashes.

When the camera is not in use or is to be transported, ensure that the unit and its accessories are stored
in the protective carry case.
26
1

Safety

KT-128 – USER MANUAL