2.1 General rules
In order to provide conditions for correct operation and the cor-
rectness of the obtained results, the following recommendations
must be observed:
before using the meter read carefully this manual,
the meter should be operated only by qualified persons that have
passed health and safety training,
do not exceed the maximum limits of the input signal,
if during the measurement symbol OL appears on the screen, it
indicates that the measured value exceeds the measurement
range,
it is unacceptable to operate:
a damaged meter which is completely or partially out of or-
der,
a device with damaged insulation of test leads,
a meter stored for an excessive period of time in disadvan-
tageous conditions (e.g. excessive humidity).
repairs may be carried out only by an authorised service point.
WARNING
Never start the measurements if you have wet or
damp hands.
Do not perform measurements in explosive atmos-
phere (e.g. in the presence of flammable gases, va-
pours, dusts, etc.). Using the meter in such condi-
tions may result in sparking and cause an explosion.
Function
3000 A AC
2 Safety
The limit values of the input signal
CMP-3kR – USER MANUAL
The maximum
input value
3000 A AC
27