Saeco MAGIC ESPRESSO PAN ALU BLK SIN017L Instrucciones De Uso página 26

ENGLISH
For best results, use only cold
milk when making cappuccino.
• (Fig.21) - Place the tip of the steam
tube in the milk to be heated and turn
the knob (7) counterclockwise; move the
container slowly up and down and in
circles to heat the milk evenly.
• (Fig.22) - After frothing the milk as
desired, turn the knob (7) clockwise
to shut off steam. Remove the cup with
frothed milk.
• (Fig.20) - Press the steam switch (6)
again.
• Load the circuit as directed in section 4.5
to prepare the machine for use.
The same method may be used
to heat other beverages.
• (Fig.23) - After completing this ope-
ration, wipe the steam tube clean with
a damp cloth.
9 CLEANING
Maintenance and cleaning jobs may be
carried out only when the machine is cold
and disconnected from the power supply.
• Do not immerse the machine in water
nor place any of its components in a
dishwasher.
• Do not use sharp objects or harsh chemical
products (solvents) for cleaning.
• It is recommended to clean the water
tank daily and refill it with fresh water.
• After heating milk, release a small
quantity of hot water to clean out the
tube. Wipe the outside of the tube clean
with a damp cloth.
• 26 •
Cleaning - Descaling
• (Fig.24) - Everyday you should empty
and wash the drip tray.
• Use a soft cloth dampened with water to
clean the machine body.
• (Fig.16) - To clean the "Crema" filter
holder:
- Remove the filter, immerse it in hot
water and wash it thoroughly.
- Wash out the inside of the "Crema"
filter holder.
• Never dry the machine and/or its compo-
nents in a microwave or conventional
oven.
10 DESCALING
Scale normally forms inside the machine
with use; descaling is necessary every
3-4 months or whenever you observe a
decrease in water flow.
If you wish to descale the
machine yourself, you can use
any commercially available non-
toxic, non-harmful descaling product
for coffee machines.
We recommend using Saeco desca-
ler.
Warning! Never use vinegar as
a descaling agent.
• Remove the water tank and empty out
any water left inside it.
• (Fig.2) - Mix the descaling agent with
water as directed on the package and
pour all the solution into the tank. Place
the tank inside the machine
• (Fig.4) - Turn on the machine by
pressing the ON/OFF switch (2).
• (Fig.5) - Place a container beneath the
steam tube.