Select Audio Device; Configuring 5.1 Surround Sound; Configuring Video Ports; Connection - Toshiba dynadock U3.0 Manual Del Usuario

dynadock™ U3.0
3. On the Recording tab of the dialog box, select one of the following:
■
■
4. Click Set Default.
5. Click OK.
6. Connect your recording device to the port you enabled in step 3.

Select Audio Device

When your computer is docked, if your audio device is connected to the
appropriate ports on the dynadock, the sound on the notebook will be
disabled. To re-enable sound through your notebook, please follow
these steps:
1. Right-click the speaker icon in the Notification Area of your Windows
desktop.
2. Select Sounds from the menu.
3. Change the Sound playback default device to other than dynadock
Audio device.

Configuring 5.1 Surround Sound

If you want to use the 5.1 Channel surround sound function, connect the
cable of the audio equipments such as microphones, home stereos,
musical instruments to the 5.1 Channel audio output ports (Front, C/Sub,
and Rear) on the front of dynadock.
1. Right-click the speaker icon in the Notification Area of your Windows
desktop.
2. Select Playback devices from the menu.
3. Select dynadock Audio device.
4. Click Configure.
5. Select 5.1 Surround, and then follow the on-screen instructions to
complete the configuration.

Configuring Video Ports

Connection

The dynadock has the following video ports:
DVI-I – for connection to DVI-I or VGA (using the DVI-I to VGA adapter
equipped with) interface monitors.
HDMI
provided) interface monitors.
EN-22
A Realtek High Definition Audio device—to use the docked
computer's Microphone jack
A dynadock Audio device—to use the dynadock's Microphone jack
® – for connection to HDMI ® (using the HDMI ®
®
®
cable which is not
User's Manual