Configuring Audio Playback Ports (Headphone); Configuring Audio Recording Ports (Microphone) - Toshiba dynadock U3.0 Manual Del Usuario

When your computer is docked, SPDIF and Line in ports may display in
NOTE
Windows
"Currently unavailable" and are actually not provided by the dynadock.

Configuring audio playback ports (Headphone)

1. Right-click the speaker icon in the Notification Area of your Windows
desktop.
(Sample Image) Speaker icon
If the speaker icon is not visible in the Notification Area, access the audio
NOTE
configuration utility through the Start menu as follows:
In Windows
Sound.
In Windows 8.1, move the mouse pointer and click
lower-left of the screen to get to the Apps view, and then click Control
Panel -> Hardware and Sound -> Sound.
In Windows 10, select Start -> All apps -> Windows System -> Control
Panel -> Hardware and Sound -> Sound.
2. Select Playback Devices from the menu.
3. On the Playback tab of the dialog box, select one of the following:
■
■
There could be other Audio devices listed in the menu depending on the
NOTE
model of your computer.
4. Click Set Default.
5. Click OK.
6. Connect your playback device to the port you enabled in step 3.

Configuring audio recording ports (Microphone)

1. Right-click the speaker icon in the Notification Area of your Windows
desktop.
2. Select Recording Devices from the menu.
User's Manual
® audio properties dialog boxes. These ports should appear as
®
7, click Start -> Control Panel -> Hardware and Sound ->
A Realtek High Definition Audio device—to use the docked
computer's Headphone/Line out jack (The Realtek High Definition
Audio is provided with some computers.)
A dynadock Audio device—to use the dynadock's 5.1 Channel
audio output ports or Headphone/Line out jack
dynadock™ U3.0
®
icon in the
®
EN-21