Zeiss Dialyt 8x56 B/GA T Marine Serie Modo De Empleo página 4

Technische Daten
Vergrößerung
Objektivdurchmesser (mm)
Sehfeld auf 1000 m (m)
Austrittspupille (mm)
Kürzeste Naheinstellung (m)
Verstellbereich Dioptrienausgleich ≥
Augenweite von/bis (mm)
Höhe mit umgestülpter Augenmuschel (mm)
Breite bei 65 mm Pupillendistanz (mm)
Breite maximal (mm)
Gewicht (g)
Spritzwasserdicht
Änderungen in Ausführung und Lieferumfang, die der technischen Weiterentwicklungdienen,
sind vorbehalten.
ZEISS Dialyt ZEISS Dialyt
8x56 B/GA T* 7x50 B/GA T*
8x 7x
56 50
110 130
7,1 7,1
7 6,5
+ 9dpt bis + 9dpt bis
– 6dpt – 6dpt
55 – 75 55 – 75
230 136
143 215
152 225
1.010 1.200
 
4
INSTRUCTIONS FOR USE
Congratulations on your outstanding new binoculars. Enjoy the impressive experience of
undistorted image reproduction which is distinguished by perfect brilliance and excellent
colour accuracy.
The ZEISS brand is famous for outstanding optical achievements, precision workmanship
and long service life. Please observe the following instructions for use in order to obtain
the best from your binoculars and to ensure that they remain your constant companion for
many years to come.
Viewing with and without eyeglasses
If you wear glasses when viewing, fold down the soft rubber eyecup over the eyepiece mount as
shown in Fig. 1/B and 2/B.
If you do not wear glasses, use the binoculars with the eyecups extended as shown in Fig.
1/A and 2/A.
Adjustment of the interpupillary distance
Adjust the two barrels relative to each other about the central axis until you see one circular field
of view when viewing with both eyes.
Focusing
When using binoculars with a middle drive, cover the objective lens on the right side of the
binoculars and focus the image on the left side using the middle drive (Fig. 1/2). Then cover
the objective lens on the left side and – if necessary – set the focus on the right side using the
diopter adjustment (Fig. 1/1). For additional focusing at different distances, use only the middle
drive (Fig. 1/2).
When using binoculars without a middle drive, but with individual eyepiece adjustment, the
focus must be individually set for both eyepieces (Fig. 2/3+4).
Note:
Always use the same object to focus on both images! When using binoculars with individual
eyepiece focusing, set both eyepieces to 0 when looking at distant objects. For short distances
or for compensating for visual deficiencies, set both eyepieces as required. When watching close
objects or to compensate for farsightedness, turn the eyepieces into the plus range.
5