Step 9
Push four LEVELER BRACKETS (32G) over the holes in the
å
bottom edges of the ENDS (A and B).
Use a hammer to gently tap a PROPEL NUT (14M) into the
å
holes in the LEVELER BRACKETS (32G) and ENDS (A and B).
Now, turn a LEVELER (16E) into each PROPEL NUT.
NOTE: To raise a corner of the unit, turn the
å
LEVELER counter-clockwise. To lower a corner,
turn the LEVELER clockwise.
14M
16E
www.sauder.com/services
A
32G
B
419643
Almost time to
celebrate! With a nap.
Page 13