Publicidad
Step 14
The tabs should insert freely into the
1
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
D30
Groove
Insert the DRAWER SIDES (D30 and D31) at an
å
angle into the slot at each end of the DRAWER
FRONT (G).
3
Minimum
190 degrees
M
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M) to the DRAWER
å
FRONT (G). Tighten one HIDDEN CAM.
Page 18
G
D31
Maximum
Arrow
210 degrees
G
VIEW THE T-LOCK BOX VIDEO
With the palm of your hand, tap the
2
DRAWER BOTTOM down into the groove.
U N
F I N
D30
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D618) into the grooves in
å
the DRAWER SIDES (D30 and D31) and DRAWER
FRONT (G).
4
D30
M
Fasten the DRAWER BACK (D194) to the DRAWER
å
SIDES (D30 and D31) and DRAWER BRACE (M). Use five
BLACK 1-9/16" FLAT HEAD SCREWS. (30S).
416130
I S H
E D
D618
G
D31
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
D194
D31
www.sauder.com/services
Publicidad
