Publicidad
Step 15
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D30
å
and D31).
Fasten the EXTENSION SLIDES (O) to the DRAWER
å
SIDES (D30 and D31). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through the fi rst and last holes.
NOTE: The screw head in the CAM must be visible through
å
the slotted hole in the SLIDE.
Fasten the PULL (82K) to the DRAWER FRONT (G). Use a
å
GOLD 1" MACHINE SCREW (50S).
Open end
O
GOLD 1" MACHINE SCREW
(1 used for the PULL)
www.sauder.com/services
10A
D31
82K
50S
G
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
416130
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D30
O
3S
Open end
Page 19
Publicidad
