Publicidad
Step 18
To make adjustments to the drawers, loosen the fi rst SCREW in the SLIDES a 1/4 turn, then turn the
å
CAM clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn the CAM.
The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw,
the lower the drawer front. By adjusting the drawers this way, it will help the DRAWER FRONTS line
up better when closed. Tighten the SCREW when fi nished with adjustments.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
Loosen this screw a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw.
The higher the screw in the oblong hole, the
higher your drawer front will be. The lower
the screw, the lower the drawer front.
Page 22
Cam
416130
www.sauder.com/services
Publicidad
