Intended Use; Cleaning And Disinfecting - Civco TEE Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
TEE Transducer Holder

INTENDED USE

TEE transducer holder allows positioning and holds a TEE transducer during procedures.
CAUTION
Federal (United States) law restricts this device to sale by or on the order of a physician.
WARNING
Verify TEE transducer fits securely in TEE transducer holder.
n
Do not use if device appears damaged.
n
USING TEE TRANSDUCER HOLDER
1. Attach TEE transducer holder by turning base fully into attachment point and secure
with supplied wrench. Do not over tighten.
2. Loosen single-point locking mechanism to orient TEE transducer holder to desired
position. After final position is achieved, tighten single-point locking mechanism to
secure.

CLEANING AND DISINFECTING

WARNING
Users of this product have an obligation and responsibility to provide the highest
n
degree of infection control to patients, co-workers and themselves. To avoid cross-
contamination, follow infection control policies established by your facility.
Do not place in mechanical washer.
n
Do not autoclave to sterilize.
n
1. Wipe all surfaces with common germicidal or antiseptic wipe, such as alcohol.
I. Single-Point Locking Mechanism
II. Base
III. Attachment Points
IV. Radiolucent Stretcher
V. Table Adapter
VI. Rail Adapter
1
English

Publicidad

Tabla de contenido
loading

Tabla de contenido