Protecting The Environment; Ec Declaration Of Conformity - Black and Decker BES510 Manual De Instrucciones

ENGLISH
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner. Never let
any liquid get inside the tool and never immerse any part
of the tool into liquid.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
Technical data
Input voltage
V
Power input W
No-load speed Min
Max. depth of cut mm
Blade diameter
mm
8
(Original instructions)
BES510 type 01
Ac
-1
Blade bore
Blade tip width
Maximum material capacity
Wood
PVC
Aluminium
Weight (bare unit)
Level of sound pressure according to EN 62841:
Sound pressure (L ) 93 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 104 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Vibration emission value (a
Vibration emission value (a

EC declaration of conformity

BES510 - Mini circular saw
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN62841-1:2015, EN 62841-2-5:2014
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
230
Black & Decker Europe, 210 Bath Road, Slough,
400
3600
27
85
BES510 type 01
mm
mm
mm
mm
mm
kg
) 2.5 m/s , uncertainty (K) 1.5 m/s
2
h,w
) 2.5 m/s , uncertainty (K) 1.5 m/s
2
h,M
%
MACHINERY DIRECTIVE
Black & Decker.
Technical Director
Berkshire, SL1 3YD
10
1.2
27
13
3
1.92
(cutting wood)
2
(cutting metal)
2
A. Smith
United Kingdom
22/02/2019