Dash Disassembly; Kit Preparation - Metra 95-5850B Instrucciones De Instalación

DASH DISASSEMBLY

1. Remove the storage mat in the pocket
above the climate-control/radio trim
panel, then remove (2) 9/32" screws
exposed. (Figure A)
2. Unclip and remove the pocket, then
remove (2) 9/32" screws exposed.
(Figure B)
3. Unclip, unplug, and remove the climate-
control/radio trim panel.
Continue to Kit Preparation
2
(Figure A)
(Figure B)

KIT PREPARATION

From the factory climate-control/radio
trim panel:
1. Remove (4) Torx screws securing the climate
control panel, then remove. (Figure A).
2. Unclip and remove the switches. (Figure A)
3. Unclip and remove the LINE IN jack. (Figure A)
4. Unclip and remove the power port assembly.
(Figure A)
To the 95-5850B climate-control/radio
trim panel:
5. Secure the climate control panel to the panel
using (4) #6 x 3/8" Phillips screws provided.
(Figure B)
6. Secure the switch trim panel to the panel
using (4) #8 x 3/8" Phillips pan-head screws
provided. (Figure B)
7. Snap the factory switches into the switch panel.
(Figure B)
8. Snap the LINE IN jack to the panel. (Figure B)
9. Snap the power port assembly to the panel.
(Figure B)
10. Attach (6) panel clips to the panel.
Continue to Kit Assembly
(Figure A)
(Figure B)
|
386.257.1197 MetraOnline.com