Rotation to the left = height –
Saw disc tilting :
The blade can be tilted by the following way :
Turning to the right = 900-450
Turning to the left =450-900
After the tilting is adjusted, tighten the fixing lever again.
Adjustment of the moulding machine
Set the height of the moulding spindle by means of the hand wheel located on the rear left side of the stand
and secure it with the arresting screw. Select the suitable filler of the table according to the tool used.
113752-Manuel-A-EN .indd 22
10/04/07 16:11:26