Transport And Storage; Lifting Of The Machine - Far Tools CM 250 Manual De Instrucciones

Machine noise characteristics

Noise level A (LpAeq) ............................................................................................ 87.3 dB(A)

Accoustic level .......................................................................................................... 93 dB(A)

TRANSPORT AND STORAGE

While transporting or handling the machine, be most careful and let this activity be done

by qualified personnel especially trained for this kind of activity.

While the machine is being loaded or unloaded,make sure that no person or subject gets

pressedby the machine !

Do not enter the area under the machine lifted by a crane or a high-lift trolley!

The machine must be stored between following temperatures : -25 °C & 55 °C.

Prepare a crane or a similar hoisting equipment,proceed as follows:

- prepare two forks, two flying rings bolts and steel ropes long enough.(flying rings bolts are part of deli-

very)

- Fix the flying rings bolts to the right cutter block supporter of planer & thicknesser.

- Fix the ropes to the ring C, and the hook of the crane D.

- Lift the machine carefully and slowly and then move it without any rapid changes of the movement to the

selected place

113752-Manuel-A-EN .indd 4

10/04/07 16:06:39

Tabla de Contenido