Far Tools CM 250 Manual De Instrucciones página 7

5- fixing of the table saw on his lower box:
6- Assembly of the 2 parts:
113752-Manuel-A-EN .indd 7
- Use the 8 Hex screws M6x16, discs
and adapted bolts to make assembly.
-and screw the feets entirely
Warning :
please well direct the plaque with
the M6 inserts.
Dim: 590 mm
Dim: 470 mm
- remove the motor cover of the table
saw
- Use the 8 Hex screws M6x16, discs
and adapted bolts to make assembly.
10/04/07 16:06:47