Operation; Starting - Skymsen AMP-400 Manual De Instrucciones

3. Operation

3.1 Starting

1– Verify if the Front Protection is correctly placed.
2– Press and release the ON/OFF Switch #02 (Pic. 04) to position "O", OFF.
3 - Press and release the ON/OFF Switch #02 (Pic. 04) to position "I" to start the equip-
ment.
However, for safety measures, the equipment will only start the movement of the Conic
Rolls when the Handle #04 (Pic. 04) is set.
PICTURE 04
02
01
25